Home > Neway Mfg. Valve and Seat Carbide Cutters > Neway Kits for Small Engine and Power Equipment >

Neway Valve Seat Cutter Kit for Briggs LO206 and Animal | World Formula Engines
Neway 45 Degree Cutter Kit

Alternative Views:

Our Price: $149.00

Stock Status:In Stock
Product Code: NEWEZ1200

Neway Valve Seat Cutter Kit Custom Packaged for Briggs LO206 and Animal | World Formula Engines
This kit includes (1) smaller series cutters required to perform a stock angle valve job. This kit also includes a slightly undersized (1/4" - .002 ) pilot to ensure a proper guide fit found on the Briggs 6.5 Performance Engines.
The CU122 cutter is packaged with different carbide blades. Stock exhaust seats are very hard on these engines and the carbide package helps to penetrate that surface.
Please NOTE caution should be used cutting the intakes seats especially when the blades are new. Use minimum downward force applied to cutter until a pressure is found that provides the best finish for the intake valve seats.
  • Smaller lighter weight valve seat cutting tools, ensures accuracy on very small cylinder heads over heavier grinding equipment.
  • Tough tungsten carbide blades, precision ground to guarantee a flat seat.
  • Accuracy, Speed, Simplicity and Quality are trademarks for Neway Equipment since 1952.
  • Made in USA
Kit Components:
  • #122 Cutter 45 degree - with special carbide package
  • 100 series 1/4" Pilot -- Slightly undersized for new and worn guides
  • Molded Plastic Case
  • "T" wrench
  • Accessories
  • Operating instructions
For Buyers looking to add a second angle add the 30 degree cutter to this kit.
Even though the factory stock angle is 45 degrees many builders are finding cylinders heads will have a light secondary top angle above the 45 degree sealing surface. This top angle is used to chamfer or knock off the top edge of the the 45 angle and can help with low lift air flow on cylinder heads.

Share your knowledge of this product. Be the first to write a review »