Home > Performance Small Engine Specialty Tools > Cylinder Head and Valves >

Vacuum Valve Lapping Stick 3/4 and 1-1/4
Lapping Stick Vac-2
Product sold is the black-colored lapping stick and vacuum cups shown in first photo. All other photos are illustrative only and are not included with the sale of this product.


 
Alternative Views:


Our Price: $21.36

Stock Status:In Stock
Availability:: Usually Ships in 24 Hours
Product Code: EPT1202
Qty:

Description Technical Specs
 
This is the lapping tool, that will make you throw away every other lapping stick that you have ever used.

The vacuum lapping tool provides a higher vacuum hold to valve, so it will not slip off easily. The rubber head flexes without popping off the valve.This system works well with small valves that have dish top heads.

Slightly textured grip spins easily between hands to provide the ability to raise valve during lapping process. Vacuum is created by plunger built into the lapping stick handle.

Lapping stick includes 3/4" and 1-1/4" suction cups to cover small engine valves, as well as larger automotive size valves. We also offer replacement vacuum cups.

Here's a helpful tip: 1-1/4" cup can be attached to a low pressure variable trigger blowgun to check valve seating. Simply attach vacuum cup as shown and blow into the intake or exhaust port with low pressure and wet check for valve sealing.

Quick tip for using a lapping stick: Spinning provides the grinding action, and occasional lifting is needed to allow the abrasive compound to reposition itself on the valve and seat. Please see our guide for additional information regarding valve guides, lapping process and compounds.

NOTE: Product sold is the black-colored lapping stick and vacuum cups shown in first photo. All other photos are illustrative only and are not included with the sale of this product.

Share your knowledge of this product. Be the first to write a review »