Flex-Hone valve guide hone 5.5mm 240-grit Silicon Carbide. This is one
of the most popular small engine hones that we sell. It will cover most
applications using a 5.5mm valve stem
For service work, these hones can clean
up carbon deposits and can be used as final surface clean-up tool after
installing a service guide. These are powered with a small hand-held drill at
approximately 500 rpm. Simply work hone back and forth in guide for
approximately 30 seconds. Once guide is honed, it should be cleaned using a
small nylon brush and a brake or carburetor cleaner.
For performance applications, these hones
are used to remove small amounts of guide material for final sizing and provide
a cross hatch finish for maximum lubrication and stem-to-guide seal.
feel free to contact us regarding the correct product and size for your
should be use when shopping for hones to ensure that they are produced with the
right abrasive material for your application.
for instruction on using Flex-Hone products and engine performance