Dyno Cams

Search

Store Home

Briggs Animal

Briggs Raptor

Shop by Brand A-K

Shop by Brand L-Z

Can't find what you're looking for? Check the Site Map, feel free to call us at 757-898-5645, or email us at sales@ezbore.net.

I'm done shopping. Take me to the E-Z Bore home page

Dyno Cams

107SS RAPTOR CAMSHAFT

DYN107SS

$93.50

Quantity:

The 107-SS is a very mild, low-lift, mod cam. It works well as a hot stock cam. This cam is very easy on the valve train and can be used in the 5HP Briggs without relieving the head.

110 CAMSHAFT

DYN110

$133.50

Quantity:

This is a good hard-pulling cam for the modified classes. This is our number one cam for Lawn Mower racing and Lawn Tractor pulling applications.

110SS RAPTOR CAMSHAFT

DYN110SS

$95.50

Quantity:

If you run a class where there is no profile check, but can only have a running lift of .233', this may be the cam you are looking for. Excellent as a hot stock cam.

112 RAPTOR CAMSHAFT

DYN112

$133.50

Quantity:

The 112-ALT has a very wide power band in a limited mod. It pulls hard off the corners.

115 RAPTOR CAMSHAFT

DYN115

$133.50

Quantity:

This cam has a very wide power band. It pulls hard and is capable of revving into the 9000 range.

116 RAPTOR CAMSHAFT

DYN116

$133.50

Quantity:

This cam has a very wide power band. It pulls hard and is capable of revving into the 9000 range.

126 MODIFIED RAPTOR CAMSHAFT

DYN126

$133.50

Quantity:

This mod cam will easily rev to 9500 RPMs and keep making HP in a limited mod. If you are looking for a mod cam that will keep right on revving and still make HP here it is!

04-3 RAPTOR CAMSHAFT

DYN043

$58.23

Quantity:

This cam will produce more low end horsepower and maintains the same top end as the 7X. This cam is hard on the block, so billet lifters and tig welding of the exhaust lifter bore is recommended. Excellent cam for all unrestricted classes.

7X RAPTOR CAMSHAFT

DYN7X

$58.21

Quantity:

This cam will produce more horsepower than any other manufactured, slightly more HP than the 95-3 and the 96-3. This cam is hard on the block so billet lifters and tig welding of the exhaust lifter bore is recommended. Excellent cam for all unrestricted classes.

89-7 EXP RAPTOR CAMSHAFT

DYN897

$58.00

Quantity:

This cam works very well in all stock and super stock classes.

94SS RAPTOR CAMSHAFT

DYN94SS

$93.50

Quantity:

Hot stock cheater cam. It does not require any type of machine work to install. Billet lifters are not required, but new valves are needed to achieve proper valve lash.

95-3 RAPTOR CAMSHAFT

DYN953

$58.00

Quantity:

This fast ramp, non-symmetrical cam is the #1 selling stock cam in the USA. It's hard on the valve train, but most racers feel the HP it produces offsets this. We recommend you use billet lifters and beef up the tappet bores.

96-3 RAPTOR CAMSHAFT

DYN963

$58.23

Quantity:

The 96-3 was designed to run close lash with extremely fast ramps. This cam makes exceptional HP with a wide power band, but it is a block buster. There is a possiblility of tappet failure, even with billet lifters.

CAM ANIMAL AN-001

DYNAN001

$78.43

Quantity:

This is the de-facto standard cam for the stock. Dyno Cams slots these cams and welds up the slot (for increased durability) then grind the AN-001 profile to the cam. This is a WKA Spec Animal Stock Class cam.

CAM ANIMAL AN-MOD1

DYNANMOD1

$98.43

Quantity:

This cam has a very wide power band and is capable of revving into the 9000+ RPM range. The AN-Mod1 is easy on the valve train.

shopsite®

Shopping Cart Software